Enhancing hydrogen evolution of MoS2 basal planes by combining single-boron catalyst and compressive strain

MoS₂ is a promising candidate for hydrogen evolution reaction (HER), while its active sites are mainly distributed on the edge sites rather than the basal plane sites. Herein, a strategy to overcome the inertness of the MoS₂ basal surface and achieve high HER activity by combining single-boron catalyst and compressive strain was reported through density functional theory (DFT) computations. The ab initio molecular dynamics (AIMD) simulation on B@MoS₂ suggests high thermodynamic and kinetic stability. We found that the rather strong adsorption of hydrogen by B@MoS₂ can be alleviated by stress engineering. The optimal stress of −7% can achieve a nearly zero value of ΔG_H (~ −0.084 eV), which is close to that of the ideal Pt–SACs for HER. The novel HER activity is attributed to (i) the B– doping brings the active site to the basal plane of MoS₂ and reduces the band-gap, thereby increasing the conductivity; (ii) the compressive stress regulates the number of charge transfer between (H)–(B)–(MoS₂), weakening the adsorption energy of hydrogen on B@MoS₂. Moreover, we constructed a SiN/B@MoS₂ heterojunction, which introduces an 8.6% compressive stress for B@MoS₂ and yields an ideal ΔGH. This work provides an effective means to achieve high intrinsic HER activity for MoS₂.     

基于CARS技术的超燃冲压发动机点火过程温度测量

相干anti-Stokes Raman散射（coherent anti-Stokes Raman scattering，CARS）技术作为一种非接触测量手段，已广泛应用于多种发动机模型燃烧室温度测量及地面试验.然而，目前的工作主要集中在稳态燃烧场温度的测量，缺乏用高分辨率的单脉冲来测量瞬变的燃烧火焰温度及组分浓度的研究.基于CARS理论，结合多参数拟合算法，开发了基于MATLAB的CARS光谱计算和拟合程序CARSCF；利用McKenna平面火焰炉在不同工况下进行了温度测量，并与DLR测量结果进行对比，结果显示开发的CARSCF具有较高的测量重复性和准确性；最后将CARS技术应用于测量超燃冲压发动机点火过程中的温度测量，获取了点火过程中的温度.结果显示，在来流Mach数为3的条件下，H₂/air点火过程中温度呈现急剧上升然后缓慢下降，而CARS信号则呈现急剧上升然后急剧下降随后又缓慢上升的趋势，并且在点火过程中最高温度为1 511 K.      

Ce掺杂CrSi2电子结构和光学性质的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法，对未掺杂及Ce掺杂CrSi2的电子结构和光学性质进行理论计算。计算结果表明，未掺杂CrSi2是间接带隙半导体，其禁带宽度为0.392 eV，掺杂Ce元素，仍然是间接半导体，带隙宽度下降为0.031eV。未掺杂CrSi2在费米能级附近主要由Cr-5d、Si-3p态贡献。Ce掺杂后在费米能级附近主要由Cr-5d轨道，Ce-4f轨道，C-2p，Si-3p轨道贡献，掺杂后电导率提高。未掺杂CrSi2有两个介电峰，掺杂后，只有一个介电峰。未掺杂CrSi2，在能量为6.008处吸收系数达到最大值，掺杂后在能量为5.009eV处，吸收系数达到最大值。     

密度泛函理论研究MN@H_2O (M=Ga,Ge, In,Sn, Sb; N=M,Al)团簇的特性

采用密度泛函理论的B3LYP, B3P86, B1B95, P3PW91和PBE1PBE方法结合SDD, LANL2DZ和CEP-121G基组计算了d~(10)组态二聚物MN(M=Ga, Ge, In, Sn和Sb; N=M和Al)的几何结构.采用B3P86/SDD进一步研究了MN@H_2O团簇的几何结构及吸附能.结果表明,水分子结合在二聚物M_2上时,对二聚物影响较大,对水分子自身影响较小.将M_2中Ga, Ge, In, Sn或Sb替换一个原子为Al时,水分子在GeAl和SnAl上的吸附能变化较大,而在GaAl, InAl和SbAl上吸附能变化较小.另外, H_2O吸附在Ga, Ge, In, Sn和Sb上时,与吸附在Al上时,吸附能的变化不大.     

Scattering of Tollmien-Schlichting waves by localized roughness in transonic boundary layers

The laminar-turbulent transition in boundary-layer flows is often affected by wall imperfections, because the latter may interact with either the freestream perturbations or the oncoming boundary-layer instability modes, leading to a modification of the accumulation of the normal modes. The present paper particularly focuses on the latter mechanism in a transonic boundary layer, namely, the effect of a two-dimensional(2 D) roughness element on the oncoming Tollmien-Schlichting(T-S) modes when they propagate through the region of the rapid mean-flow distortion induced by the roughness. The wave scattering is analyzed by adapting the local scattering theory developed for subsonic boundary layers(WU, X. S. and DONG, M. A local scattering theory for the effects of isolated roughness on boundary-layer instability and transition: transmission coefficient as an eigenvalue. Journal of Fluid Mechanics, 794, 68–108(2006)) to the transonic regime, and a transmission coefficient is introduced to characterize the effect of the roughness. In the sub-transonic regime, in which the Mach number is close to, but less than, 1, the scattering system reduces to an eigenvalue problem with the transmission coefficient being the eigenvalue; while in the super-transonic regime, in which the Mach number is slightly greater than 1, the scattering system becomes a high-dimensional group of linear equations with the transmission coefficient being solved afterward. In the largeReynolds-number asymptotic theory, the K′arm′an-Guderley parameter is introduced to quantify the effect of the Mach number. A systematical parametric study is carried out,and the dependence of the transmission coefficient on the roughness shape, the frequency of the oncoming mode, and the K′arm′an-Guderley parameter is provided.     

Magnetite nanoparticles−based hydroxyl radical scavenging activity assay of antioxidants using N,N-dimethyl-p-phenylenediamine probe

Excessive amounts of reactive oxygen species (ROS), unless counterbalanced by antioxidants, can cause cellular damage under oxidative stress conditions; therefore, antioxidative defenses against ROS must be measured. With the development of nanotechnology, nanoparticles have found numerous applications in science, health, and industries. Magnetite nanoparticles (Fe ₃ O ₄ :MNPs) have attracted attention because of their peroxidase-like activity. In this study, hydroxyl radicals (•OH) generated by MNPs-catalyzed degradation of H ₂ O ₂ converted the N,N-dimethyl-p-phenylenediamine (DMPD) probe into its colored DMPD•+ radical cation, which gave an absorbance maximum at λ = 553 nm. In the presence of antioxidants, •OH was partly scavenged by antioxidants and produced less DMPD• ⁺ , causing a decrease in the 553 nm-absorbance. Antioxidant concentrations were calculated with the aid of absorbance differences between the reference and sample solutions. The linear working ranges and trolox equivalent antioxidant capacity coefficients of different classes of antioxidants were determined by applying the developed method. In addition, binary and ternary mixtures of antioxidants were tested to observe the additivity of absorbances of mixture constituents. The method was applied to real samples such as orange juice and green tea. Student t-test, F tests, and the Spearman’s rank correlation coefficient were used for statistical comparisons.     

Momentum and heat transfer of a special case of the unsteady stagnation-point flow

This paper investigates the unsteady stagnation-point flow and heat transfer over a moving plate with mass transfer,which is also an exact solution to the unsteady Navier-Stokes(NS)equations.The boundary layer energy equation is solved with the closed form solutions for prescribed wall temperature and prescribed wall heat flux conditions.The wall temperature and heat flux have power dependence on both time and spatial distance.The solution domain,the velocity distribution,the flow field,and the temperature distribution in the fluids are studied for different controlling parameters.These parameters include the Prandtl number,the mass transfer parameter at the wall,the wall moving parameter,the time power index,and the spatial power index.It is found that two solution branches exist for certain combinations of the controlling parameters for the flow and heat transfer problems.The heat transfer solutions are given by the confluent hypergeometric function of the first kind,which can be simplified into the incomplete gamma functions for special conditions.The wall heat flux and temperature profiles show very complicated variation behaviors.The wall heat flux can have multiple poles under certain given controlling parameters,and the temperature can have significant oscillations with overshoot and negative values in the boundary layers.The relationship between the number of poles in the wall heat flux and the number of zero-crossing points is identified.The difference in the results of the prescribed wall temperature case and the prescribed wall heat flux case is analyzed.Results given in this paper provide a rare closed form analytical solution to the entire unsteady NS equations,which can be used as a benchmark problem for numerical code validation.     

A Comparison of Two Isoreticular Metal–Organic Frameworks with Cationic and Neutral Skeletons: Stability,Mechanism, and Catalytic Activity

Although many ionic metal–organic frameworks (MOFs) have been reported, little is known about how the charge of the skeleton affects the properties of the MOF materials. Herein we report how the chemical stability of MOFs can be substantially improved through embedding electrostatic interactions in structure. A MOF with a cationic skeleton is impervious to extremely acidic, oxidative, reductive, and high ionic strength conditions, such as 12 m HCl (301 days), aqua regia (86 days), H₂O₂ (30 days), and seawater (30 days), which is unprecedented for MOFs. DFT calculations suggested that steric hinderance and the repulsive interaction of the cationic framework toward positively charged species in microenvironments protects the vulnerable bonds in the structure. Diverse functionalities can be bestowed by substituting the counterions of the charged framework with identically charged functional species, which broadens the horizon in the design of MOFs adaptable to a demanding environment with specific functionalities.     

Mechanistic Insights into C(sp2)−C(sp)N Reductive Elimination from Gold(III) Cyanide Complexes

A new family of phosphine-ligated dicyanoarylgold(III) complexes has been prepared and their reactivity towards reductive elimination has been studied in detail. Both, a highly positive entropy of activation and a primary ^12/13C KIE suggest a late concerted transition state while Hammett analysis and DFT calculations indicate that the process is asynchronous. As a result, a distinct mechanism involving an asynchronous concerted reductive elimination for the overall C(sp²)−C(sp)N bond forming reaction is characterized herein, for the first time, complementing previous studies reported for C(sp³)−C(sp³), C(sp²)−C(sp²), and C(sp³)−C(sp²) bond formation processes taking place on gold(III) species.     

Chemical-Reductant-Free Electrochemical Deuteration Reaction using Deuterium Oxide

We report a method for the electrochemical deuteration of α,β-unsaturated carbonyl compounds under catalyst- and external-reductant-free conditions, with deuteration rates as high as 99 % and yields up to 91 % in 2 h. The use of graphite felt for both the cathode and the anode was key to ensuring chemoselectivity and high deuterium incorporation under neutral conditions without the need for an external reductant. This method has a number of advantages over previously reported deuteration reactions that use stoichiometric metallic reductants. Mechanistic experiments showed that O₂ evolution at the anode not only eliminates the need for an external reductant but also regulates the pH of the reaction mixture, keeping it approximately neutral.